12V -50-110°C Digital Thermostat Temperature Control Switch Module with Waterproof Thermostat NTC Sensor Probe

Specification:

Temperature range:-50 -110°C

Dimensions: 48.5 * 40mm

Temperature control mode: ON / OFF

Resolution:When temperature is 0.1°, the resolution is -9.9 -99.9, other temperature segment is 1°C

Control accuracy: 0.1 °C

Hysteresis accuracy: 0.1°C

Refresh rate: 0.5S

High temperature protection: 0 -110°C

Supply voltage: DC 12V

Static current: ≤ 35MA, attract current ≤ 65MA

Output voltage: DC 12V

Output power: 20A relay

Measurement input: NTC (10K 0.5%) Waterproof Sensor

Environmental requirements: -10 -60°C ,Humidity 20% -85%

How to use:

Connect the power supply and the load, you can supply to the controller, is displayed as a measured temperature

Press the SET button, the display flashes the temperature,

Press - to set the desired temperature,

After setting press SET to confirm return,

The controller automatically performs the relay by setting off!

Lights, LED status descriptions:

Indicator: Off The relay is switched off, Always indicate the relay is closed.

LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.

Package Included:

1 x 12V -50-110°C Digital Thermostat Temperature Control Switch Module with Waterproof Thermostat NTC Sensor Probe

aeProduct.getSubject() 010617 (1) 010617

W1209 LED Termostato digital Control de temperatura Termómetro Termocontrolador Módulo de interruptor DC 12V Sensor NTC a prueba de agua